From c8b273c80abe98e53828f46079a187975938a56a Mon Sep 17 00:00:00 2001
From: Private Island Networks <opensource@privateisland.tech>
Date: Mon, 1 Sep 2025 12:34:17 -0400
Subject: rename source to src

---
 source/sync_fifo.v | 110 -----------------------------------------------------
 1 file changed, 110 deletions(-)
 delete mode 100644 source/sync_fifo.v

(limited to 'source/sync_fifo.v')

diff --git a/source/sync_fifo.v b/source/sync_fifo.v
deleted file mode 100644
index 56c83d4..0000000
--- a/source/sync_fifo.v
+++ /dev/null
@@ -1,110 +0,0 @@
-/*
- *       sync_fifo.v
- *
- *   Copyright (C) 2018, 2019 Mind Chasers Inc.
- *
- *   Licensed under the Apache License, Version 2.0 (the "License");
- *   you may not use this file except in compliance with the License.
- *   You may obtain a copy of the License at
- *
- *       http://www.apache.org/licenses/LICENSE-2.0
- *
- *   Unless required by applicable law or agreed to in writing, software
- *   distributed under the License is distributed on an "AS IS" BASIS,
- *   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- *   See the License for the specific language governing permissions and
- *   limitations under the License.
- *
- *	function: FIFO / data store between RX and TX for each path
- *
- */
-
-`timescale 1ns /10ps
-
-module	sync_fifo	#(parameter	FIFO_PTR = 11,
-					FIFO_WIDTH = 9,
-					FIFO_DEPTH = 2048 )
-(
-	input	rstn,
-	input	clk,
-	
-
-	// input
-	input	we,
-	input	[FIFO_WIDTH-1:0]	d_in,
-
-	// output
-	input 	re,
-	output	[FIFO_WIDTH-1:0]	d_out,		
-	output	empty,
-	output almost_full,
-	
-	// fifo_control
-	input reset_ptrs,
-	
-	// debug
-	output active
-
-);
-	
-`include "ethernet_params.v"
-
-reg	[FIFO_PTR-1:0] 	wr_ptr;
-reg	[FIFO_PTR-1:0] 	rd_ptr;
-reg [FIFO_PTR-1:0] wr_bytes_available;			// use for size calculation below
-
-
-always @(posedge clk, negedge rstn)
-	if( !rstn )
-		wr_ptr <= 'd0;
-	else if ( reset_ptrs )
-		wr_ptr <= 'd0;
-	else if ( we )
-		wr_ptr <= wr_ptr + 1;
-		
-/* 
- * 	rd_ptr
- * 	use empty flat to make sure rd_ptr doesn't advance when empty ( error condition )
- */
-always @(posedge clk, negedge rstn)
-	if( !rstn )
-		rd_ptr <= 'd0;
-	else if ( reset_ptrs )
-		rd_ptr <= 'd0;
-	else if ( re && !empty )
-		rd_ptr <= rd_ptr + 1;
-
-assign empty = ( rd_ptr == wr_ptr ) ? 1'b1 : 1'b0;
-assign almost_full = wr_bytes_available < MTU ? 1'b1 : 1'b0;
-
-always @(posedge clk, negedge rstn)
-	if( !rstn )
-		wr_bytes_available <= FIFO_DEPTH-1;
-	else if ( wr_ptr >= rd_ptr )
-		wr_bytes_available <= FIFO_DEPTH-1 - (wr_ptr - rd_ptr);
-	else
-		wr_bytes_available <= rd_ptr - wr_ptr;
-	
-assign active = ~empty;
-		
-
-dpram dpram_fifo(
-	.rstn(  rstn  ),
-	.a_clk( clk ),
-	.a_clk_e( 1'b1 ),
-	.a_we( we ),
-	.a_oe( 1'b0 ),
-	.a_addr( wr_ptr ),
-	.a_din( d_in ),
-	.a_dout( ),
-	// port B
-	.b_clk(  clk ),
-	.b_clk_e( re ),
-	.b_we( 1'b0 ),
-	.b_oe( re  ),
-	.b_addr( rd_ptr ),
-	.b_din( 9'h0 ),
-	.b_dout( d_out )
-);
-
-endmodule
-- 
cgit v1.2.3-8-gadcc