#
#	file: sim.do
#
# #
# # QSYS_SIMDIR is used in the Quartus-generated IP simulation script to
# # construct paths to the files required to simulate the IP in your Quartus
# # project. By default, the IP script assumes that you are launching the
# # simulator from the IP script location. If launching from another
# # location, set QSYS_SIMDIR to the output directory you specified when you
# # generated the IP script, relative to the directory from which you launch
# # the simulator.
# #
set QSYS_SIMDIR .

# #
# # Source the generated IP simulation script.

source $QSYS_SIMDIR/mentor/msim_setup.tcl

# #
# # Set any compilation options you require (this is unusual).
# set USER_DEFINED_COMPILE_OPTIONS <compilation options>
# set USER_DEFINED_VHDL_COMPILE_OPTIONS <compilation options for VHDL>
# set USER_DEFINED_VERILOG_COMPILE_OPTIONS <compilation options for Verilog>
# #
# # Call command to compile the Quartus EDA simulation library.

dev_com

# #
# # Call command to compile the Quartus-generated IP simulation files.

com

# #
# # Add commands to compile all design files and testbench files, including
# # the top level. (These are all the files required for simulation other
# # than the files compiled by the Quartus-generated IP simulation script)
# #

vlog -work work -vopt +define+SIMULATION ../../src/ml_module_agilex.v
vlog -work work ../src/tb.sv

# #
# # Set the top-level simulation or testbench module/entity name, which is
# # used by the elab command to elaborate the top level.
# #

set TOP_LEVEL_NAME tb

# #
# # Set any elaboration options you require.
set USER_DEFINED_ELAB_OPTIONS -voptargs=+acc
# #
# # Call command to elaborate your design and testbench.

elab

# #
# # Run the simulation.
# run -a
# #
# # Report success to the shell.
# exit -code 0
# #